P.S. Free 2025 Cisco CCST-Networking dumps are available on Google Drive shared by 2Pass4sure: https://drive.google.com/open?id=1B-jmKd6ndLD0udsYY0tijsxhC1vXFSPq
It is similar to the Cisco Certified Support Technician (CCST) NetworkingExam (CCST-Networking) desktop-based exam simulation software, but it requires an active internet. No extra plugins or software installations are required to take the Cisco Certified Support Technician (CCST) NetworkingExam (CCST-Networking) web-based practice test. Every browser such as Chrome, Mozilla Firefox, MS Edge, Internet Explorer, Safari, and Opera supports this format of CCST-Networking mock exam.
Topic | Details |
---|---|
Topic 1 |
|
Topic 2 |
|
Topic 3 |
|
Topic 4 |
|
Topic 5 |
|
>> CCST-Networking Guaranteed Success <<
You will gain a clear idea of every Cisco CCST-Networking exam topic by practicing with Web-based and desktop Cisco CCST-Networking practice test software. You can take Cisco CCST-Networking Practice Exam many times to analyze and overcome your weaknesses before the final Cisco CCST-Networking exam.
NEW QUESTION # 36
Which component of the AAA service security model provides identity verification?
Answer: A
Explanation:
The AAA service security model consists of three components: Authentication, Authorization, and Accounting.
*Authentication: This is the process of verifying the identity of a user or device. It ensures that only legitimate users can access the network or service.
*Authorization: This determines what an authenticated user is allowed to do or access within the network.
*Auditing/Accounting: This component tracks the actions of the user, including what resources they access and what changes they make.
Thus, the correct answer is C. Authentication.
References :=
*Cisco AAA Overview
*Understanding AAA (Authentication, Authorization, and Accounting)
NEW QUESTION # 37
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.
Which command should you use? Complete the command by selecting the correct options from each drop-down lists.
Answer:
Explanation:
Explanation:
To determine if you can reach the router, you should use thepingcommand followed by the IP address of the router. Thepingcommand is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in theipconfigresults is typically the router's IP address in a home or small office network. In this case, the Default Gateway is192.168.0.1, which is the address you would ping to check connectivity to the router.
References:=
* How to Use the Ping Command
* Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use thepingcommand with the IP address of the router.
* Command:ping
* Target:192.168.0.1
So, the completed command is:
* ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation:
* ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
* 192.168.0.1: This is the IP address of the default gateway (the router) as shown in theipconfigoutput.
Pinging this address will help determine if the computer can communicate with the router.
References:
* Using the ping Command: ping Command Guide
NEW QUESTION # 38
Which two pieces of information should you include when you initially create a support ticket? (Choose 2.)
Answer: B,E
Explanation:
* Statement A: "A detailed description of the fault." This is essential for support staff to understand the nature of the problem and begin troubleshooting effectively.
* Statement C: "A description of the conditions when the fault occurs." This helps in reproducing the issue and identifying patterns that might indicate the cause of the fault.
* Statement B: "Details about the computers connected to the network." While useful, this is not as immediately critical as understanding the fault itself and the conditions under which it occurs.
* Statement D: "The actions taken to resolve the fault." This is important but typically follows the initial report.
* Statement E: "The description of the top-down fault-finding procedure." This is more of a troubleshooting methodology than information typically included in an initial support ticket.
References:
* Best Practices for Submitting Support Tickets: Support Ticket Guidelines
NEW QUESTION # 39
A Cisco PoE switch is shown in the following image. Which type of port will provide both data connectivity and power to an IP phone?
Answer: C
Explanation:
In the provided image of the Cisco PoE switch, the ports identified with number 6 are the standard RJ-45 Ethernet ports typically found on switches that provide both data connectivity and Power over Ethernet (PoE).
PoE ports are designed to supply power to devices such as IP phones, wireless access points, and other PoE-enabled devices directly through the Ethernet cable.
Ports:
*2: Console port (for management and configuration)
*3 and 4: Specific function ports (often for management)
*6: RJ-45 Ethernet ports (capable of providing PoE)
*7: SFP ports (for fiber connections, typically do not provide PoE)
Thus, the correct answer is C. Ports identified with number 6.
References :=
*Cisco Catalyst 2960-L Series Switches Data Sheet
*Cisco PoE Overview
NEW QUESTION # 40
A host is given the IP address 172.16.100.25 and the subnet mask 255.255.252.0.
What is the CIDR notation for this address?
Answer: B
Explanation:
The CIDR (Classless Inter-Domain Routing) notation for the subnet mask 255.255.252.0 is /22. This notation indicates that the first 22 bits of the IP address are used for network identification, and the remaining bits are used for host addresses within the network1.
References :=
*Subnet Cheat Sheet - 24 Subnet Mask, 30, 26, 27, 29, and other IP Address CIDR Network References
*Subnet Mask to CIDR Notation: The given subnet mask is 255.255.252.0. To convert this to CIDR notation:
*Convert the subnet mask to binary: 11111111.11111111.11111100.00000000
*Count the number of consecutive 1s in the binary form: There are 22 ones.
*Therefore, the CIDR notation is /22.
References:
*Understanding Subnetting and CIDR: Cisco CIDR Guide
NEW QUESTION # 41
......
If you really intend to pass the CCST-Networking exam, our software will provide you the fast and convenient learning and you will get the best study materials and get a very good preparation for the exam. The content of the CCST-Networking guide torrent is easy to be mastered and has simplified the important information. What’s more, our CCST-Networking prep torrent conveys more important information with less questions and answers. The learning is relaxed and highly efficiently.
Exam CCST-Networking Fees: https://www.2pass4sure.com/CCST/CCST-Networking-actual-exam-braindumps.html
BONUS!!! Download part of 2Pass4sure CCST-Networking dumps for free: https://drive.google.com/open?id=1B-jmKd6ndLD0udsYY0tijsxhC1vXFSPq
Tags: CCST-Networking Guaranteed Success, Exam CCST-Networking Fees, Cheap CCST-Networking Dumps, Exam CCST-Networking Study Solutions, CCST-Networking Dumps Guide